WWIV Chains \ Doors
The ChainEdit function is also quite similar to the BoardEdit function. The ChainEdit is a means of adding, deleting, or modifying on-line programs. The information presented here should be sufficient to enable the sysop to setup many on-line programs.
When ChainEdit is run, a summary of the chains currently available, if any, is presented as a listing. Available options are: Insert, Delete, Modify and Quit. When a new chain is inserted or an old entry is modified, the sysop is given a chance to change the following data:
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ A. Description : ** NEW CHAIN ** ³ ³ B. Filename : REM ³ ³ C. SL : 10 ³ ³ D. AR : None. ³ ³ E. ANSI : Optional ³ ³ F. DOS Interrupt: Used ³ ³ G. 300 Baud : Allowed ³ ³ H. Shrink : No ³ ³ I. Disable pause: No ³ ³ J. Local only : No ³ ³ K. Multi user : No ³ ³ L. Registered by: AVAILABLE ³ ³ M. Usage : 0 ³ ³ N. Age limit : 0 - 255 ³ ³ ³ ³ Which (A-N,[,],Q)? ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
The description of the chain, printed out for callers. For example, you might have something like "Food Fight" or "TradeWars." Many sysops put the version number of the game after its title so that users will know whether or not a "new" version that they may have seen elsewhere is running on this BBS. Many users will upload the "latest" version to the Sysop if that version is not currently running.
The filename actually executed. The program to be used can have either an EXE, COM, or BAT extension. Programs with a BAS or CHN extension cannot be run from WWIV.
If the game requires a dropfile as a parameter, you can use one of the following replacement parameters:
%1 - CHAIN.TXT %A - CALLINFO.BBS %C - CHAIN.TXT %D - DOORINFO1.DEF %O - PCBOARD.SYS %R - DOOR.SYS
These parameters are replaced with a full path and filename of the specified text file the bulletin board creates holding data about that caller, such as the caller's name, security level, time left, etc. For most programs explicitly written for WWIV v4, the parameter should be placed after the filename. If you do not, you will see a "Parameter file not found" error message. If you see that message when running a chain, add the parameter as in "tw2002 %C". If the program is not specifically made for WWIV, it may be necessary to run it from a batch file to setup other environment variables or settings. See the game documentation for more information.
The SL (security level) required in order to run the chain. Most sysops will set this at the level of validated users or higher.
The AR required in order to run the chain. The sysop can allow only certain people to play the game by adjusting the AR. This may be particularly useful if the game is limited to a certain number of players. People can sign up to play the game and those chosen for the first round can be given the appropriate AR. When the game ends, a different group of players can then be given the AR for another game.
If ANSI is required in order to run the chain. Because some games or on-line programs make extensive use of ANSI screens, those users who do not have ANSI may experience significant problems with the game. This feature allows you to screen out the people who do not have ANSI capability.
F) DOS Interrupt
Many programs run remotely will not have built in code for accessing the modem. For these programs, the BBS should be set to intercept the DOS calls, and "re-direct" the output to go to the modem, as well as the screen. It is possible, however, that you will have a program that will do its own modem access, in which case it should be set so that the BBS won't intercept DOS calls. In most cases, you WILL want the BBS to intercept DOS calls.
If the game does not seem to operate properly, you may need to experiment with this setting. As a general rule, you should try having the BBS intercept DOS calls for those games designed specifically for WWIV and try having the BBS not intercept DOS calls for those games designed to be run on other systems. These settings may still need to be changed, but the general rule is sound advice for what to try as the initial setting for this variable.
G) Win32 FOSSIL
TODO: Need a good description from RushFan :-)
J) Local only
This toggle defines the chain to be run in local mode only or unrestricted.
K) Multi user
This toggle allows users on different instances of the BBS to run the chain simultaneously. The chain itself must support multiple users. Check the documentation for the chain for proper configuration.
L) Registered By
If CHAIN_REG = Y in WWIV.INI, you can allow users to sponsor chains for your BBS by paying the registration fees or some other method you may choose. You can change the sponsor here.
The is the number of time the chain has been run.
N) Age Limit
This allows chiain access to be limited by age.
If you are going to add a door and installation instructions, please include a link to the official source of the game of the game. If the company no longer exists, please direct everyone to a WWIVnet Node and Transfer Sub where it can be located.
Windows 10: NTVDM support and Legacy Console
If you are using Windows 10, you must be sure to set the NTVDM Command Prompt to use legacy console.
To set this, open the console properties and ensure that the
options -> "Use legacy console" checkbox is selected.
These doors are known to work on WWIV because one of the SysOps is running them. We'll provide linkes and installation instructions to get you going.
|Doors with Installation Steps|
|Legend of the Red Dragon|
|LORD II - The New World|
|Planets: The Exploration of Space (TEOS)|
|Doors Running on WWIV BBSes (no specific guides)|
|Ambroshia - Test of Time|
|Barron Realms Elite|
|Alpha Centauri VADV|
|Food Fite! (The Sequel!)|
|Freshwater Fishing Simulator|
|Moguls (Stock Market Sim)|
|New York 2008|
|Over-Under (Card Solitaire)|
|Scrabble (The Word Game)|
|Stack 'em (Tetris Online!)|
|TeleHang (Round Robin Word Guess)|
|Wheel of Fortune (No Vanna!)|
|WWIVMail/QWK Mail Packets|
|Yankees & Rednecks|
Frequently Asked Questions concerning Chains:
The designation of chains originated in Turbo Pascal versions of WWIV when the BBS literally "chained" to the program. Although WWIV no longer operates in that fashion and is no longer written in Pascal, the CHAINEDIT terminology has remained.
Not all files can be run as external programs from WWIV. Only those files that do all I/O through DOS calls can be run. This means that Wordstar, WordPerfect, the Norton Utilities, and most other graphics programs can NOT be run from WWIV.
Games can be characterized as WWIV games if one of two conditions occur. First, if the game is written to specifically make use of the drop file known as CHAIN.TXT. By drop file, is meant a file that is created by the BBS software either at the time of logon or when a door (chain) is entered. This file typically contains information about the user and/or the system. A commented CHAIN.TXT, written by MrBill is included later in this document. Some games are written to make specific use of the information contained in the CHAIN.TXT file. These games, although perhaps not specifically written for WWIV alone, are discussed in the category of WWIV games because they have been written to work with WWIV.
The second condition that causes a game to be known as a WWIV game is that it makes use of the special dos color codes contained in the WWIV software. These games are characterize by use of the DOS color commands (pseudo-ansi) found in WWIV. These colors are discussed in the DEFAULT section of the software and are configurable by the user. WWIV will interpret a "heart" symbol as a color command when it is followed by a number. Because WWIV is one of the few BBS programs that can use these color commands, games containing them are almost always written for the exclusive use of WWIV boards. These games are also most often characterized as games where the CHAINEDIT option of USE DOS INTERRUPTS should be left at the default setting of Y.
Games that may be considered as being written for other software are those which do not use CHAIN.TXT and which instead use one of the drop files of another bbs software. These usually include games which use DORINFO1.DEF (RBBS, QBBS, REMOTE ACCESS), games which use PcBOARD.SYS (PcBoard versions 12 and 14), games which use DOOR.SYS (Wildcat 3.0, GAP, and PcBoard 14.5+), and games which use CALLINFO.BBS (pre-version 3.0 of Wildcat). These games can often be made to work with WWIV provided that a 'converter' is also used. The use of converters and so forth will be discussed later.
Setting up WWIV games. Most WWIV games have relatively good documentation and therefore setting them up and getting them to work is usually very straight forward. However, if there is no documentation and/or the documentation seems insufficient, then there are a number of things that you can experiment with by trial and error to see if you can get the game to run. 2 Placement of Game Files. If the game does not tell you where to place the files, you can try each of the following setups to see if one of them causes the game to work:
In its own directory. i.e. C:\WWIV\MWAR
- In a directory called CHAINS (especially for older games) i.e. C:\WWIV\CHAINS
- In a directory off of CHAINS (also popular place for older WWIV games) i.e. C:\WWIV\CHAINS\MWAR
In the main BBS directory. i.e. C:\WWIV
Relationship to CHAIN.TXT. If you get a 'parameter file notfound' or other type of error message from the game, then it may be that it is not finding CHAIN.TXT correctly. You may try incorporating a batch file and copying the CHAIN.TXT to the directory where the game is located. Use DOS commands as follows:
copy con MWAR.BAT @echo off copy chain.txt c:\wwiv\chains\mwar cd chains\mwar mwar cd\wwiv
then press CTRL Z or F6 (function key 6) to save the batch file.
- DOS Interrupts. Some games written especially for WWIV will let the BBS handle the DOS INTERRUPTS. This is especially true of many games written in PASCAL for use with WWIV. A sign that sometimes the DOS interrupt option is set incorrectly is when the game echos double characters. If the game is viewable from local mode but not from the remote mode, then you may want to experiment with setting the DOS INTERRUPTS option differently.
- SHRINK Option. Many games do not necessitate the BBS to shrink out in order to run them; however, if you experience a "lock up" or freezing of the computer when you try to run the game, this may be an indication that there is insufficient memory available and that you should shrink the BBS. It may be helpful to set the BBS to shrink out if the game is large (ie the file size is big).
- Setting up Non-WWIV Games. Because these games are not specifically made for WWIV, the first step is to determine what software they support. WWIV creates all major drop files required for most online games. Below is a list of BBS packages and the drop file they use.
GAP -> Door.Sys Genesis Deluxe -> CallInfo.BBS GT PowerComm -> GTUser.BBS Osiris# -> ExtInfo#.QBS PCBoard v12xx -> PCBoard.Sys PCBoard.Dat Users PCBoard v14xx -> PCBoard.Sys PCBoard.Dat Users QuickBBS -> DorInfo1.Def RBBS# -> DorInfo#.Def WildCat -> CallInfo.BBS Remote Access -> Dorinfo1.Def SpitFire WWIV -> Chain.Txt
- Fossil Drivers. WWIV now requires a fossil driver in order to run. Some games expect a fossil to be present even though that is not mentioned in the documentation of the game. This is particularly true for games written for QBBS, RBBS, and OPUS. Games which DO NOT require a fossil driver should work fine even though the driver is loaded. The better known fossil drivers are X00 and BNU. Many WWIV system operators report excellent results from X00.
- Batchfiles in the Multi-Instance Environment. The batchfile below shows an example of having a game in a different directory for each "instance". It uses Trade Wars as an example. Whether or not the setup shown below is necessary depends upon the chain and how it is written. The example is theoretical. Current versions of TradeWars have not been checked to determine whether or not it requires such a setup. Lines beginning with REM are "remark" lines and are meant to help you understand what is transpiring in the batch file.
@Echo Off REM --> Check to see if instance 3 if %WWIV_INSTANCE%==3 goto Inst3 REM --> Check to see if instance 2 if %WWIV_INSTANCE%==2 goto Inst2 REM --> Example only has three instances; got here, must be REM --> instance 1 goto Inst1 REM --> Subroutine for Instance 1 :Inst1 Copy C:\WWIV\CHAIN.TXT C:\WWIV\DOORS\TW\1 C: Cd\WWIV\DOORS\TW\1 TW2002 Goto Done REM --> Subroutine for Instance 2 :Inst2 Copy C:\WWIV\CHAIN.002 C:\WWIV\DOORS\TW\2\CHAIN.TXT C: Cd\WWIV\DOORS\TW\2 TW2002 Goto Done REM --> Subroutine for Instance 3 :Inst3 Copy C:\WWIV\CHAIN.003 C:\WWIV\DOORS\TW\3\CHAIN.TXT C: Cd\WWIV\DOORS\TW\3 TW2002 Goto Done REM --> Cleanup area, exits batch file in proper dir, or REM --> whatever necessary. :Done C: Cd\WWIV
- Other Comments regarding CHAINS. Some of the games written for WWIV in Pascal are presented in uncompiled form by the authors. This is often done so that the pascal code may be altered or customized for your board. Usually these authors have made use of something called a COMMON.PAS file which interfaces the game with WWIV. If a particular game has not been compiled, you must first compile it with the appropriate version of the Turbo Pascal compiler using the appropriate version of COMMON.PAS. Most of the versions of COMMON.PAS are available for downloading on the WWIV Support Boards.
- BRUNxx. Some games written in QuickBASIC have been compiled to utilize an intermediate program called BRUN (Basic RUN time module). Such games require the BRUN module specific to the compiler. Current versions of BRUN are BRUN20, BRUN30, BRUN40, and BRUN45. Again, these programs are available on most WWIV Support Boards. The BRUNxx file may be placed in your path and used by all programs that require it. One advantage of the Basic RUN time compilers is that the resulting EXE's require significantly less space (approximately 35k less per program).
- Commented Chain.txt. CHAIN.TXT Definition File by MrBill. Note: Some of the original information about Mr. Bill and MrBill's Abode has been shortened to accomodate the format of these docs.
-----------CHAIN.TXT----------------------------------- 1 User number MRBILL User alias Bill User real name User callsign (HAM radio) 21 User age M User sex 16097.00 User gold 05/19/89 User last logon date 80 User colums 25 User width 255 User security level (0-255) 1 1 if Co-SysOp, 0 if not 1 1 if SysOp, 0 if not 1 1 if ANSI, 0 if not 0 1 if at remote, 0 if local console 2225.78 User number of seconds left till logoff F:\WWIV\GFILES\ System GFILES directory (gen. txt files) F:\WWIV\DATA\ System DATA directory 890519.LOG System log of the day 2400 User baud rate 2 System com port MrBill's Abode System name MrBill System SysOp 83680 Time user logged on/# of secs. from midn 554 User number of seconds on system so far 5050 User number of uploaded k 22 User number of uploads 42 User amount of downloaded k 1 User number of downloads 8N1 User parity 2400 Com port baud rate 7400 WWIVnet node number
Links to Lists of Doors
We don't know if all the Doors on these lists work with WWIV or not. But let's try 'em!