Customizing Menus

Table of Contents

Parts of a Menu

There are several files that go into making each WWIV menu, separated out by the file extension. For example, main.ans, main.msg, main.mnu.json, and all go into creating the main menu. The different file extensions work like so:

  • ANS - Displayed for users; traditionally using ANSI escape codes
  • MSG - Displayed for users; traditionally using heart or pipe codes (or plain ASCII)
  • MNU.JSON - Stores the actions for the menu and what keys they correspond to
  • PRO - (prompt) Shown at the bottom of the menu and when a user chooses expert mode

If a user has ANSI enabled, and an ANS file exists, it will be shown. If the ANS file does not exist, the MSG file will be displayed instead. These files are for visual purposes entirely, and can be laid out however you like.

WWIV can also generate menus on the fly for you, with your own color theming. See Generated Menus below for more on this.

The simplest way to get started with editing the menu behavior is using the menu editor in wwivconfig. You can also directly edit the JSON file to change the behavior of the menus.

Using WWIVconfig to edit a menu

Before you begin editing menus, make a backup of your current setup.

To get to the menu editing, enter wwivconfig and select the menu editor. Then select the menu set you wish to edit, and finally, the specific menu in that set.

    ┌───────────────────────────────────────────────────────────── Menu: main ┐                                   
    │         Title: WWIV Main Menu                                           │                                   
    │           ACS:                                                          │                                   
    │   Number Keys: Set Sub Number                                           │                                   
    │  Logging Type: Key                                                      │                                   
    │  Display Help: User Choice                                              │                                   
    │ Enter Actions: [Edit] 0 actions.                                        │                                   
    │  Exit Actions: [Edit] 0 actions.                                        │                                   
    │      Password:                                                          │                                   
    │  Clear Screen: No                                                       │                                   
    │ Menu Settings: [Edit]                                                   │                                   
    │   Edit Prompt: [Edit]                                                   │                                   
    │    Menu Items: [Edit]                                                   │                                   
    │     View Menu: [View]                                                   │                                   

There are a lot of things you can alter about the menus at this screen.

Toggled Options

There are several entries with toggleable options:

  • Number keys: set sub number, set dir number, and nothing
  • Logging type: command, key, description, and nothing
  • Display Help: always, on entrance, user choice, and never
  • Clear Screen: no and yes

  • The ACS prompt allows you to define who gets to see the menu. For example, the sysop menu has user.sysop == true as the access control. The expression is free text, and whether or not it's valid is shown in the status bar at the bottom of the screen. Similarly, Password allows you to password protect a menu. The ACS reference explains this in detail.

Generated Menus

  • Menu Settings allows you to configure the generated menu, and View Menu allows you to preview it. The generated menu settings are pretty straightforward, and are an easy way to put your own "flavor" on WWIV without fussing with ANSI art.

The menu looks like so (these are the defaults):

    ┌── Generated Menu Setting ┐                                                           
    │  Num Columns: 3          │                                                           
    │  Title Color: |#5        │                                                           
    │  Brace Color: |#1        │                                                           
    │    Key Color: |#2        │                                                           
    │   Text Color: |#0        │                                                           
    │   Show Empty: No         │                                                           
    │ Num Newlines: 1          │                                                           

Editing the Prompt

  • Edit Prompt allows you to configure the prompt (including pipe codes) within the standard message editor. This information is saved in the .PRO file. When editing, you will see a live preview for all lines except the line your cursor is on. More details on piop codes, colors, and macros are in the docs.

If you are editing the prompt file outside of wwivconfig, you may have to manually enter an escape code before the pipe code macros if they do not work out of the box.

Editing Actions

  • Enter Actions and Exit Actions allow you to choose actions to occur when someone enters or leaves the menu. Currently there are none configured in our example. Adding an action is similar to the way we are going to add an action below.

  • Menu Items is where you can define what any key does on that particular menu.vThere are a lot of possibilities - here's what a partial list looks like:

         ┌────────────────────────────────────────── [Edit Menu Items] ┐                                         
         │ #1 (IE)         'InstanceEdit' [instanceedit]               │                                         
         │ #2 (JE)         '' [conferenceedit]                         │                                         
         │ #3 (BE)         '' [subedit]                                │                                         
         │ #4 (CE)         '' [chainedit]                              │                                         
         │ #5 (CHAT)       '' [toggleavailable]                        │                                         
   ┌─────│ #6 (CU)         '' [changeuser]                             │main ┐                                   
   │     │ #7 (DE)         '' [diredit]                                │     │                                   
   │     │ #8 (TEDIT)      'TextEdit' [textedit]                       │     │                                   
   │   Nu│ #9 (GE)         '' [bulletinedit]                           │     │                                   
   │  Log│ #10 (LOAD)       '' [loadtext]                              │     │                                   
   │  Dis│ #11 (MAILR)      '' [readallmail]                           │     │                                   
   │ Ente│ #12 (RELOAD)     'ReloadMenus' [reloadmenus]                │     │                                   
   │  Exi│ #13 (RESETQSCAN) '' [resetqscan]                            │     │                                   
   │     │ #14 (IVOTES)     'VoteEdit' [voteedit]                      │     │                                   
   │  Cle│ #15 (LOG)        '' [log]                                   │     │                                   
   │ Menu│ #16 (NLOG)       '' [netlog]                                │     │                                   
   │   Ed│ #17 (PENDING)    'Pending NetData' [pending]                │     │                                   
   │    M│ #18 (STATUS)     '' [status]                                │     │                                   
   │     │ #19 (VOTEPRINT)  '' [voteprint]                             │     │                                   
   └─────│ #20 (YLOG)       '' [ylog]                                  │─────┘                                   
         │ #21 (ZLOG)       '' [zlog]                                  │                                         
         │ #22 (UPLOAD)     'Upload Post' [uploadpost]                 │                                         
         │ #23 (QWK)        'QWK Mail' [MENU]                          │                                         
         │ #24 (CLS)        'Clear Screen' [cls]                       │                                         

A full list of commands is in the menu commands section of the documentation.

Example of Editing Menu Actions

The process for editing or adding actions is essentially the same for all actions. To illustrate the process, here's a step-by-step guide for adding an ANSI file before the door menu is displayed.

First, back up your menu files before editing.

In this example, we are going into the main menu, and will edit #46 (.) 'Doors' [doors]. Move the cursor down to that entry and press Enter.

  ┌───────────────────────────────────────────────────────────────── Menu: . ┐                                   
  │  Menu Key: .                                                             │                                   
  │ Menu Text: Doors                                                         │                                   
  │ Help Text: Chains Menu                                                   │                                   
  │ Sysop Log: .                                                             │                                   
  │  Instance: Doors                                                         │                                   
  │       ACS:                                                               │                                   
  │  Password:                                                               │                                   
  │   Visible: Yes                                                           │                                   
  │   Actions: [Edit] 1 action.                                              │                                   

The configuration options are pretty self-explanatory (and can be left as the defaults for our example). Press Enter again, and you will see this pop up:

  │ Sysop Log: .             ┌──── [Edit Actions] ┐  
  │  Instance: Doors         │ doors:             │  
  │       ACS:               └────────────────────┘                                     

You can use Delete, Insert, and Move here to change the actions. I've had issues moving entries, but that's okay, we can easily rebuild it if we mess up. (Also, you have a backup, right?)

When you press I, it adds an entry after the currently selected entry. I did that twice, and it looked like this:

  ┌──── [Edit Actions] ┐  
  │ doors:             │  
  │ :                  │  
  │ :                  │    

I selected the first entry, and pressed Enter to modify the entry. Here's what a blank entry looks like.

    ┌────────────────────────────────────────────────────────────────── Edit Action ┐                                
    │  Cmd: [Edit] ''                                                               │                                
    │ Data:                                                                         │                                
    │  ACS:                                                                         │                                

When you press Enter on the CMD line, you get a dialog box to select what you want to have happen first.

Because I was having issues moving the actions, I decided to just recreate them. Our first action is going to be PrintFile; it's near the end of the list.

   ┌───────────────────────────────────────────────────────────────── Select Command ┐                               
   │ Log                  [System]      Syosp command to view the log file           │                               
   │ Pause                [System]      Pauses the screen, like 'pausescr()' in C co │                               
   │ PrintDevices         [System]      Show the 'devices'.  I have no idea why.     │                               
   │ PrintFile            [System]      <filename>  Prints a file, first checking to │                               
   │ PrintFileNA          [System]      <filename>  Just like PrintFile, but the use │                               
   │ RequestChat          [System]      Request chat from the sysop                  │                               
   │ RunBasic             [System]      <script name>Runs a WWIVbasic Script         │                               
   │ SystemInfo           [System]      View the system info                         │                               
   │ TextEdit             [System]      Edit a text file                             │                               
   │ TimeBank             [System]      Enter the time bank                          │                               
   │ ToggleExpert         [System]      Turn 'X'pert mode on or off (toggle)         │                               
   │ TurnMCIOff           [System]      Disable MCI codes                            │                               
   │ TurnMCIOn            [System]      Enable MCI codes                             │                               
   │ WHO                  [System]      Show who else is online                      │                               
   │ WWIVVer              [System]      Get the wwiv version                         │                               
   │ YLog                 [System]      View yesterdays log                          │                               
   │ YourInfo             [System]      Display the yourinfo screen                  │                               
   │ YourInfoDL           [System]      Prints user info for downloads               │                               
   │ ZLog                 [System]      View the ZLog                                │                               
   │ cls                  [System]      Clear the screen                             │                               
   │ ConfigUserMenuSet    [User]        Takes the user into the user menu config so  │                               
   │ InitVotes            [Vote]                                                     │                               
   │ Vote                 [Vote]        Enter the voting both                        │                               
   │ VotePrint            [Vote]        Show the voting statistics                   │                               

Under Data, we're going to put the name of the file without an extension. WWIV will look in the language directory for the file first, falling back to the GFILES directory if needed. The extensions that will be checked are described in Displaying Text

    ┌────────────────────────────────────────────────────────────────── Edit Action ┐                                
    │  Cmd: [Edit] 'PrintFile'                                                      │                                
    │ Data: chains                                                                  │                                
    │  ACS:                                                                         │                                

As above, you can configure ACS for each action separately. Since we want all users to see this, we're leaving that blank. I found out that the doors menu clears the screen before displaying, so I added a pause after the file is shown. You can add Pause in the same way that we added PrintFile. No information is needed other than what's shown below.

    ┌────────────────────────────────────────────────────────────────── Edit Action ┐                                
    │  Cmd: [Edit] 'Pause'                                                          │                                
    │ Data:                                                                         │                                
    │  ACS:                                                                         │                                

Finally, for the last action, we will re-add Doors in the same way.

    ┌────────────────────────────────────────────────────────────────── Edit Action ┐                                
    │  Cmd: [Edit] 'Doors'                                                          │                                
    │ Data:                                                                         │                                
    │  ACS:                                                                         │                                

Now that we have defined all three, we back out and see that Actions: [Edit] 1 action. has changed to Actions: [Edit] 3 actions. Back all the way out and quit wwivconfig. Now, when a user using that menuset goes into the doors menu, that file will be displayed (if it exists), pause for the user, then continue on to the doors menu.

JSON Storing of Menu Settings

All this is written to main.mnu.json. The original part of the file looked like this:

                "item_key": ".",
                "item_text": "Doors",
                "visible": true,
                "help_text": "Chains Menu",
                "log_text": ".",
                "instance_message": "Doors",
                "acs": "",
                "password": "",
                "actions": [
                        "cmd": "Doors",
                        "data": "",
                        "acs": ""

and now looks like this with our additional entries:

                "item_key": ".",
                "item_text": "Doors",
                "visible": true,
                "help_text": "Chains Menu",
                "log_text": ".",
                "instance_message": "Doors",
                "acs": "",
                "password": "",
                "actions": [
                        "cmd": "PrintFile",
                        "data": "chains",
                        "acs": ""
                        "cmd": "Pause",
                        "data": "",
                        "acs": ""
                        "cmd": "Doors",
                        "data": "",
                        "acs": ""

It is completely possible to edit the JSON file with the text editor of your choice as well instead of using wwivconfig, but you then have to be careful to maintain the correct format yourself.